BenQ FP51G User Manual

19 How to adjust your monitor
How to adjust your monitor
A Look at the Control Panel
There are 6 keys for user’s control including “ iKey ”, “Exit”, “Enter”, “<” and “>” key and a power
switch. The following descriptions are the introduction of these keys & switch.
1. “ iKey ” : Adjust vertical position, phase, horizontal position and pixel clock automatically.
2. “Exit” key: Back to previous menu or exit OSD.
3. W (Left) key: For Left/Decrease adjustment. Left key is the hot key for Contrast.
4. X (Right) key: For Right/Increase adjustment. Right key is the hot key for Brightness.
5. “Enter” key: Activate OSD, enter sub menu, select items, and confirm selection.
6. “Power”: Turn the power on or off.
Hot Key Mode
Brightness hot key and Contrast hot key
1
1
1
8
1 2 3 4 5 6
Press the X key to enter the Brightness menu.
Further press the W or X keys to adjust the
degree of screen brightness and press the Exit
key to exit OSD.
Press the W key to enter the Contrast menu.
Further press the W or X keys to adjust the
degree of screen contrast and press the Exit key
to exit OSD.

BenQ FP51G Specifications

Panel Specifications

LCD Size	15.0"
Display Area	304.1 x 228.1 mm
Pixel Pitch	0.297 mm
Brightness	250 cd/m2
Contrast Ratio	400:1
Viewing Angle	120/100 (L/R;U/D, CR>=10)
Response Time	12 ms
Display Colors	16.2 million

Monitor Specifications

Resolution	1024 x 768 (XGA)
Horizontal Frequency	31 - 63 KHz
Vertical Frequency	56 - 75 Hz
Video Bandwidth	25 - 80 MHz
Input Connector	D-Sub
Power Supply	90~264 AC, Built-in
Power Consumption (On mode)	30 W (max)
Power Consumption (Power saving mode)	1 W/120V, 2 W/240V

Weight and Dimensions

Net Weight	8.2 Lbs
Gross Weight	10.1 Lbs
Dimensions	338 x 331 x 136 mm
CTN Dimensions	395 x 380 x 120 mm