EasyManuals Logo
Home>BenQ>Monitor>FP51G

BenQ FP51G User Manual

BenQ FP51G
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8 How to install your monitor hardware
How to detach the stand base
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point
and turn it on.
Picture may differ from product supplied for your
region.
Turn on the monitor by pressing the power button on the
front of the monitor.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor to install
the monitor software.
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the
power cable. Turn off the computer before unplugging the
monitor signal cable.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler
or a mouse will crack the glass or damage the LCD
substrate voiding your warranty. Sliding or scraping
the monitor around on your desk will scratch or
damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
2. Release the locking clip on one side of the stand base
whilst pulling the edge of the base away from the
stand arm.
3. Release the other locking clip to detach the stand base
from the monitor stand arm.

Other manuals for BenQ FP51G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BenQ FP51G and is the answer not in the manual?

BenQ FP51G Specifications

Panel Specifications IconPanel Specifications
LCD Size15.0"
Display Area304.1 x 228.1 mm
Pixel Pitch0.297 mm
Brightness250 cd/m2
Contrast Ratio400:1
Viewing Angle120/100 (L/R;U/D, CR>=10)
Response Time12 ms
Display Colors16.2 million
Monitor Specifications IconMonitor Specifications
Resolution1024 x 768 (XGA)
Horizontal Frequency31 - 63 KHz
Vertical Frequency56 - 75 Hz
Video Bandwidth25 - 80 MHz
Input ConnectorD-Sub
Power Supply90~264 AC, Built-in
Power Consumption (On mode)30 W (max)
Power Consumption (Power saving mode)1 W/120V, 2 W/240V
Weight and Dimensions IconWeight and Dimensions
Net Weight8.2 Lbs
Gross Weight10.1 Lbs
Dimensions338 x 331 x 136 mm
CTN Dimensions395 x 380 x 120 mm

Related product manuals