10 How to install your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the
power cable. Turn off the computer before unplugging the
monitor signal cable.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler
or a mouse will crack the glass or damage the LCD
substrate voiding your warranty. Sliding or scraping
the monitor around on your desk will scratch or
damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
2. Release the locking clip on one side of the stand base
whilst pulling the edge of the base away from the
stand arm.
3. Release the other locking clip to detach the stand base
from the monitor stand arm.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
Panel Specifications
