BenQ FP93G User Manual

28 How to adjust your monitor
Color sub menu
Bluish - applies a cool tint to the image and is factory pre-set to the PC industry standard white
color.
Reddish - applies a warm tint to the image and is factory pre-set to the news print standard white
color.
Normal - allows video and still photographs to be viewed with natural coloring. This is the factory
default color.
User Preset:
User Preset is provided so you can tailor the
image color tint to suit your liking. The blend of
the Red, Green and Blue primary colors can be
altered to change the color tint of the image. The
default start setting is 50. Decreasing one or
more of the colors will reduce their respective
influence on the color tint of the image. e.g. if
you reduce the Blue level the image will
gradually take on a yellowish tint. If you reduce
Green, the image will become a magenta tint.
To reset the defaults, see Recall sub menu for details.
Downloaded from ManualMonitor.com Manuals

BenQ FP93G Specifications

Panel Specifications

LCD size	19.0"
display area	376.3 x 301.1 mm
pixel pitch	0.294 mm
brightness	300 cd/m²
contrast	700:1
viewing angle	140/135
response time	6 ms
display colors	16.2 million

Monitor Specifications

resolution	1280 x 1024 (SXGA)
horizontal frequency	31 - 81 KHz
vertical frequency	60 - 76 Hz
video bandwidth	25 - 135 MHz
input connector	D-sub, DVI
power consumption (on mode)	40 W (max)
power consumption (power saving mode)	1W/120V, 2W/240V

Dimensions and Weight

dimensions	410 x 404.2 x 168.2 mm
net weight	11.0 lbs
gross weight	14.3 lbs