BenQ FP93G User Manual

40 Specifications
*Response Time: The time it takes to switch a pixel off and then on and then off again (or from
black to white and back to black). A low response time is desirable for the display of moving
images without ghosting. The Response Time quoted for many LCD monitors is specific to
transitions from black to white and back again, it does not specify the time required to switch
between the many gray levels or colors that make up an image.
Gray to Gray or GTG Response Time: “Real world” video content contains a combination of
grayscale images. It generally takes longer for a pixel to transition to an intermediate level of
intensity (i.e. a gray or color level) than it does for it to turn completely black or completely white.
For example the “Gray to Gray response time” of an LCD panel may generally be 30 to 40 ms while
the “Response Time” is 12 ms. BenQ's AMA technology greatly reduces the GTG response time so
moving parts of the image are clearer, no matter what the image content is. With Advanced Motion
Acceleration (AMA), the average GTG response time can be as low as 2 ms.
Operating voltage
Dimensions (H x W x D)
Weight
Automatic switched mode power supply,
90-264 V, 47-63 Hz
410.1 x 404.2 x 168.2 mm
5.0 kg
Downloaded from ManualMonitor.com Manuals

BenQ FP93G Specifications

Panel Specifications

LCD size	19.0"
display area	376.3 x 301.1 mm
pixel pitch	0.294 mm
brightness	300 cd/m²
contrast	700:1
viewing angle	140/135
response time	6 ms
display colors	16.2 million

Monitor Specifications

resolution	1280 x 1024 (SXGA)
horizontal frequency	31 - 81 KHz
vertical frequency	60 - 76 Hz
video bandwidth	25 - 135 MHz
input connector	D-sub, DVI
power consumption (on mode)	40 W (max)
power consumption (power saving mode)	1W/120V, 2W/240V

Dimensions and Weight

dimensions	410 x 404.2 x 168.2 mm
net weight	11.0 lbs
gross weight	14.3 lbs