BenQ G2200W User Manual

10 How to assemble your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the
power cable. Turn off the computer before unplugging the
monitor signal cable.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate
voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor
surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
2. Press the locking clips to detach the monitor base
from the monitor stand arm.
Downloaded from ManualMonitor.com Manuals

BenQ G2200W Specifications

General

Display diagonal	22 \
Separate H/V sync	No
Display resolution	1680 x 1050 pixels
Contrast ratio (dynamic)	2500:1
Contrast ratio (typical)	1000:1
Digital vertical frequency	55 - 76 Hz
Digital horizontal frequency	31 - 83 kHz
Display brightness (typical)	300 cd/m²
Video in	DVI-D, D-Sub
Ethernet LAN (RJ-45) ports	0
HDCP	Yes
Certification	TCO'03
Product color	Black
Market positioning	-
Bundled software	Driver CD
Power consumption (typical)	45 W
Power consumption (PowerSave)	2 W
Sustainability certificates	ENERGY STAR
LED indicators	Stand-by

Weight and Dimensions

Depth (with stand)	163.4 mm
Width (with stand)	401.6 mm
Height (with stand)	512.2 mm
Weight (without stand)	5300 g