BenQ G2200W User Manual

9 How to assemble your monitor hardware
4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip
inwards as illustrated. Position the cables together and
reinsert the clip over them to retain the cables neatly in
place behind the monitor stand.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the
front of the monitor.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor
on page 11
to install the monitor software.
Downloaded from ManualMonitor.com Manuals

BenQ G2200W Specifications

General

Display diagonal	22 \
Separate H/V sync	No
Display resolution	1680 x 1050 pixels
Contrast ratio (dynamic)	2500:1
Contrast ratio (typical)	1000:1
Digital vertical frequency	55 - 76 Hz
Digital horizontal frequency	31 - 83 kHz
Display brightness (typical)	300 cd/m²
Video in	DVI-D, D-Sub
Ethernet LAN (RJ-45) ports	0
HDCP	Yes
Certification	TCO'03
Product color	Black
Market positioning	-
Bundled software	Driver CD
Power consumption (typical)	45 W
Power consumption (PowerSave)	2 W
Sustainability certificates	ENERGY STAR
LED indicators	Stand-by

Weight and Dimensions

Depth (with stand)	163.4 mm
Width (with stand)	401.6 mm
Height (with stand)	512.2 mm
Weight (without stand)	5300 g