23 Assembling your monitor with a height adjustment stand
Using the monitor wall mounting kit
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the
installation of a wall mount bracket. Before starting to install a monitor wall mounting kit,
please read the precautions carefully.
Precautions:
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material is stable to support the weight of the monitor.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
1. Remove the monitor base.
Lay the screen face down on a clean and well-padded
surface.
Detach the monitor base as instructed in How to detach
the base on page 19.
2. Remove the monitor stand.
Use a cross-pointed screwdriver to release the screws
that fixing the monitor stand to the monitor.The use of a
magnetic-head screwdriver is recommended to avoid of
losing the screws.
Then pull the monitor stand backward away from the
monitor.
In case you intend to use your monitor on the stand in the
future, please keep the monitor base, monitor stand, and
screws somewhere safe for future use.
3. Follow the instruction manuals of the wall
mount bracket you purchased to complete
the installation.
To Next Page
Loading...
Need help?
General
