13 How to assemble your monitor hardware
How to detach the stand base
If your model came with a height adjustment stand (HAS), refer to How to detach the base on page 19 for details.
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging
the power cable. Turn off the computer before
unplugging the monitor signal cable.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like a towel on
the desk for padding, before laying the screen face down
on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
2. Press the locking clips to detach the
monitor base from the monitor stand arm.
While holding the monitor stand arm with one hand
and pushing the locking clips downward with the other,
detach the monitor base from the stand arm.
If the screen size is 27 inches, follow the illustration on the
right to detach the monitor base. Release the thumbscrew
on the bottom of the monitor base and detach the monitor
base as illustrated.
To Next Page
Loading...
Need help?
General
