45 How to adjust your monitor
Choosing an appropriate picture mode
Your monitor provides various picture modes that are suitable for different types of images.
See Picture Mode on page 53 for all the available picture modes.
Go to Picture Advanced and Picture Mode for a desired picture mode.
If Low Blue Light is preferred, select Low Blue Light to enable it. And go to Eye Care and
Low Blue Light to select one of the low blue light modes from the list.
Adjusting screen brightness automatically (Bright Intelligence,
selected models only)
The built-in light sensor works with Bright Intelligence technology to detect the ambient light,
image brightness and contrast, and then balance the screen automatically. It helps keep image
details as well as to reduce eye strain.
To enable this function, go to Eye Care > Bright Intelligence > ON.
Enabling color vision accessibility (Color Weakness)
Color Weakness is accessibility that helps people with color vision deficiency to distinguish
colors. You are provided with Red Filter and Green Filter on this monitor. Choose one as
needed.
1. Go to Eye Care > Color Weakness.
2. Choose either Red Filter or Green Filter.
3. Adjust the value of the filter. A stronger effect is produced as the value increases.
The Bright Intelligence function works with certain picture modes only. If it is not available, its menu options will
become grayed out.
The performance of Bright Intelligence may be impacted by the light sources and the monitor tilt angle. You can
increase the light sensor sensitivity from
Eye Care > Bright Intelligence > Sensor Sensitivity if needed. See
page 48 for more information.
To Next Page
Loading...
Need help?
General
