45 Menu operation
Function descriptions
Menu Descriptions
Language Sets the language for the On-Screen Display (OSD) menus.
Background
Settings
• Background Color
Sets the background color for the projector.
• Splash Screen
Allows you to select which logo screen will be displayed during projector start-up.
Menu Settings
• Menu Type
Sets the OSD menu type according to your needs.
• Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
• Menu Position
Sets the On-Screen Display (OSD) menu position.
Light Source
Information
This menu page displays the following information:
• Light Source Usage Time
• Light hours used under Normal Mode, ECO Mode, Dimming Mode,
Custom Mode.
Standby Settings
• Standby Mode
• Eco: The projector maintains at normal standby mode with less than 0.5W
power consumption.
• Network: The projector maintains at network standby mode with less than
2W power consumption.
• Normal: Allows the projector to provide network, monitor out and audio
pass through functions in standby mode.
• Auto Disable Network Standby Mode
Allows the projector to disable the network function after a set period of time
after it enters standby mode. For instance, if 20 min is selected, the projector is
able to provide the network function for 20 minutes after it enters standby mode.
When 20 minutes is up, the projector enters normal standby mode.
• Audio Pass Through
The projector can play sound when it is in standby mode and the corresponding
jacks are correctly connected to devices. Press / to choose the source that
you wish to use. See Connection on page 18 for how to make the connection.
To Next Page
Loading...
