46 Menu operation
Operation
Settings
• Reminder Message
Sets the reminder messages on or off.
• LED Indicator
You can turn off the LED warning lights. This is to avoid any light disturbance
when viewing images in a dark room.
• Power On/Off Settings
• Auto Power Off: Allows the projector to turn off automatically if no input
signal is detected after a set period of time to prevent unnecessary waste of
light source life.
• Direct Power On: Allows the projector to turn on automatically once the
power is fed through the power cord.
• Signal Power On: Sets whether to turn the projector directly on without
pressing POWER or ON when the projector is in standby mode
and detects a HDMI or DisplayPort signal.
Security
Settings
• Panel Key Lock
With the control keys on the projector and remote control locked, you can
prevent your projector settings from being changed accidentally (by children, for
example). When the Panel Key Lock is on, no control keys on the projector
and remote control will operate except POWER.
To release panel key lock, press and hold (the right key) on the projector or
remote control for 3 seconds.
If you turn off the projector without disabling panel key lock, the projector will still be in locked
status the next time it is turned on.
• Password/Power On Lock
See Utilizing the password function on page 22.
Network
Settings
• Wired LAN
See Controlling the projector through a Wired LAN environment on page 24.
• AMX Device Discovery
When this function is On, the projector can be detected by AMX controller.
• MAC Address (Wired)
Displays the mac address for this projector.
To Next Page
