8 Introduction
Control Panel
1. MENU
Turns on the On-Screen Display (OSD) menu.
2. Arrow keys ( , , , )
When the On-Screen Display (OSD) menu is
activated, these keys are used as directional
arrows to select the desired menu items and
to make adjustments.
Keystone keys (, )
Displays the keystone correction page.
Volume keys (, )
Decreases or increase the projector volume.
3. POWER
Toggles the projector between standby mode
and on.
4. BACK
Goes back to previous OSD menu, exits and
saves menu settings.
5. AUTO
Automatically determines the best picture
timings for the displayed image when PC signal
(analog RGB) is selected.
6. OK
Confirms the selected On-Screen Display
(OSD) menu item.
7. SOURCE
Displays the source selection bar.
All the key presses described in this document are available on the remote control or projector.
To Next Page
