What to do if my BenQ LU9235 Projector has no picture?
If your BenQ Projector displays no picture, ensure the video source is on and the signal cable is correctly connected. Check the connection between the projector and the input signal device. Also, verify that you've selected the correct input signal using the SOURCE key on the projector or remote control.
How to fix a BenQ LU9235 that does not turn on?
If your BenQ Projector isn't turning on, first, make sure the power cord is securely plugged into both the projector's AC inlet and a working power outlet, and that the outlet switch is on, if applicable. Also, if the projector was recently in use, wait until the cooling down process has completed before attempting to turn it on again.
How to fix a blurred image on a BenQ LU9235?
If you're experiencing a blurred image on your BenQ Projector, try these steps: First, adjust the focus of the lens using the focus ring. Second, adjust the projection angle, direction, and height of the unit to properly align the projector and the screen. Finally, make sure the lens cover is open.
Why is my BenQ LU9235 remote control not working?
If your BenQ Projector remote control isn't working, try the following: * Replace the battery with a new one. * Remove any obstacles between the remote control and the projector. * Ensure you are within 7 meters (23 feet) of the projector.
To Next Page
General
