How to fix BenQ LU960ST Projector not turning on?
If your BenQ projector isn't turning on, check these items: Ensure the power cord is securely plugged into both the AC inlet on the projector and a functioning power outlet (and that the outlet switch is on, if applicable). Also, if you've recently turned the projector off, wait until the cooling down process has completed before attempting to turn it on again.
What to do if BenQ projector has no picture?
If your BenQ projector isn't displaying a picture, there are a few things to check: First, make sure your video source is turned on and the signal cable is properly connected. Second, verify the projector is correctly connected to the input signal device. Finally, ensure you've selected the correct input signal using the SOURCE key on the projector or remote control.
How to fix BenQ LU960ST Projector remote control not working?
If the remote control for your BenQ projector isn't working, try these steps: First, replace the battery with a new one. Second, make sure there are no obstacles between the remote control and the projector. Finally, ensure you are within 7 meters (23 feet) of the projector.
Why is my BenQ LU960ST image blurred?
If you're experiencing a blurred image with your BenQ projector, it might be due to a couple of reasons. First, the projection lens might not be correctly focused, so adjust the focus using the focus ring. Second, the projector and the screen might not be aligned properly, so adjust the projection angle, direction, and height of the unit if necessary.
What to do if I forgot my BenQ LU960ST Projector password?
If you've forgotten your BenQ projector password: 1. Press and hold AUTO on the projector or remote control for 3 seconds. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the projector.
General| Resolution | 1920 x 1200 (WUXGA) |
|---|---|
| Light Source | Laser |
| Zoom Ratio | 1.2x |
| Light Source Life (Normal) | 20000 hours |
| Speaker | 10W |
| Lens Shift | Vertical: ±60%; Horizontal: ±23% |
| Connectivity | HDMI, VGA, USB, RS-232, LAN |
| Outputs | HDMI, VGA |
| Input Lag | 16 ms |
To Next Page
