BenQ LU960ST - Remote Control

English
17
Remote control
• ON / OFF
Toggles the projector between standby mode and on.
• KEYSTONE+/KEYSTONE-
Manually corrects distorted images resulting from an
angled projection.
• VOLUME +/VOLUME -
Increases/decreases the projector volume.
• QUICK INSTALL
Displays the Quick Install OSD menu.
• MUTE
Toggles projector audio between on and off.
• Arrow keys (
▲
Up,
▼
Down,
◄
Left,
►
Right)
When the On-Screen Display (OSD) menu is activated,
the arrow keys are used as directional arrows to select
the desired menu items and to make adjustments. See
"Using the menu" on page 37 for details.
• ENTER
Selects an available picture setup mode. Activates the
selected On-Screen Display (OSD) menu item.
• MENU
Turns on the On-Screen Display (OSD) menu. Goes back
to previous OSD menu, exits and saves menu settings.
• EXIT
Goes back to previous OSD menu, exits and saves menu
settings.
• INPUT
Selects an input source for display.
• PCITURE
Press to display Picture menu.
• NETWORK
Selects Network Display as the input signal source.
• AUTO SYNC
Automatically determines the best picture timings for the
displayed image.
• ASPECT
Selects the display aspect ratio.
• BLANK
Used to hide the screen picture.