BenQ LU960ST - Controls and Functions; Control Panel

English
15
Controls and functions
Control panel
• Power
Toggles the projector between standby mode and on. See "Switch on the projector" on
page 30 and "Switch off the projector" on page 36 for details.
• MENU/EXIT
Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and
saves menu settings. See "Using the menu" on page 37 for details.
• Volume keys ( , )
Decreases or increasesthe projector volume.
• ECO BLANK
The automatic switch to Eco Blank Mode after the projector is turned on for over three
minutes without a display source.
• Arrow keys (
▲
,
▼
,
◄
,
►
)
When the On-Screen Display (OSD) menu is activated, these keys are used as directional
arrows to select the desired menu items and to make adjustments. See "Using the menu" on
page 37 for details.
• MODE/ENTER
Selects an available picture setup mode.
Enacts the selected On-Screen Display (OSD) menu item. See "Using the menu" on page 37
for details.
• Keystone keys ( , )
Manually corrects distorted images resulting from an angled projection.
• AUTO
Automatically determines the best picture timings for the displayed image. See "Auto adjusting
the image" on page 35 for details.
• SOURCE
Displays the source selection bar.