BenQ LU960ST - Switch off the Projector

English
36
Fine tuning the image clarity
Sharpen the image by rotating the FOCUS ring.
Focus ring
Switch off the projector
1. Press POWER or OFF and a conrmation message will appear prompting you.
If you don't respond in a few seconds, the message will disappear.
2. Press POWER or OFF a second time. The POWER indicator light ashes orange, the
projection light source shuts down.
3. Once the cooling process nishes, a "Power Off Ring Tone" will be heard. The POWER
indicator light is a steady orange and fans stop. Disconnect the power cord from the power
outlet.
Caution:
• To protect the light source, the projector will not respond to any commands during the cooling process.
• Press POWER or ON again to start the projector after the POWER indicator light turns orange.