BenQ LU960 - Remote Control

English
7
Remote control
ON / OFF
Toggles the projector between standby mode and on.
KEYSTONE+/KEYSTONE-
Manually corrects distorted images resulting from an angled projection.
VOLUME +/VOLUME -
Increases/decreases the projector volume.
QUICK INSTALL
Displays the Quick Install OSD menu.
MUTE
Toggles projector audio between on and o.
Arrow keys (
▲
Up,
▼
Down,
◄
Left,
►
Right)
When the On-Screen Display (OSD) menu is activated, the arrow keys
are used as directional arrows to select the desired menu items and to
make adjustments.
ENTER
Selects an available picture setup mode. Activates the selected On-
Screen Display (OSD) menu item.
MENU
Turns on the On-Screen Display (OSD) menu. Goes back to previous
OSD menu, exits and saves menu settings.
EXIT
Goes back to previous OSD menu, exits and saves menu settings.
INPUT
Selects an input source for display.
PCITURE
Press to display Picture menu.
NETWORK
Selects Network Display as the input signal source.
AUTO SYNC
Automatically determines the best picture timings for the displayed im-
age.
ASPECT
Selects the display aspect ratio.
BLANK
Used to hide the screen picture.