33
and configuration on the first use of the monitor, so you can switch scenarios easily without
further hasty setup.
1. Connect the input sources to the monitor properly as instructed in Connect the video cable.
on page 24.
2. Select a scenario for an available input source. The scenario changes with the input source.
If you skip the configuration now, the scenario is preset to be Game for each input source.
You can change the setting from Menu > Input later.
3. To switch an input source / scenario, press the looping key. See Switching the inputs quickly
on page 33 for more information.
Switching the inputs quickly
1. Press the looping key on the monitor or the key on the remote control to bring up the
input source selection menu. Each source is preset for a scenario as described in Setting up
your monitor for different scenarios on page 32. The scenario changes with the input source.
• You are prompted to complete the configuration again after a system reset from Menu > System > Reset
All.
• If you have switched off the scenario configuration from Menu > Input > Scenario, the scenario of each
input is set to be Standard by default.
An example of monitor use
in different scenarios
For movie watching
For console gaming For PC gaming
For console gaming
Color Mode: Custom
Audio mode: Racing game
HDR: OFF
FreeSync Premium
3840 x 2160
120 Hz
ConfirmMoveBack
Please select a scenario
Input
Quick Menu
Color Mode
Multiple-Input
Eye Care
Audio
Lighting
System
HDMI 1: Game
HDMI 2: Game
DP: Game
Scenario
Standard
Game
Cinema
To Next Page
Loading...
Need help?
General
