Operation 49
Function Description
Presentation
Timer
Reminds the presenter to finish the presentation within a certain time
frame. See "Setting the presentation timer" on page 35 for details.
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using
the menus" on page 25 for details.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See "Choosing a location" on page 14 for details.
Menu
Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Auto Power
Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off " on page
53 for details.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image" on
page 37 for details.
Panel Key
Lock
Disables or enables all panel key functions except Power on the
projector and keys on the remote control. See "Locking control keys" on
page 38 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 12 hours.
Splash
Screen
Allows you to select which logo screen will display during projector
start-up. The following options are available: BenQ logo, Black screen,
Blue screen.
Quick
Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a normal
90-second duration to approximately 30 seconds.
High
Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 38 for details.
Audio
Settings
Mute
Volume
Power on/off ring tone
See "Adjusting the sound" on page 39 for details.
4. SYSTEM SETUP: Basic menu
5. SYSTEM SETUP:
Advanced menu
To Next Page
Loading...
