BenQ MS560 - Settings; Projector Installation and Receiver; Auto Source Search and Sync; Light and Timer Settings

38 Menu operation
Settings
Projector
Installation
See Choosing a location on page 12.
Remote
Receiver
Allows you to enable all the remote receivers or one specific remote receiver on
the projector.
Auto Source
Search
Allows the projector to automatically search for a signal.
Auto Sync
• On: Allows the projector to automatically determines the best picture timings for
the displayed image when PC signal (analog RGB) is selected and AUTO is
pressed.
• Off: The projector will not respond when AUTO is pressed.
Light Settings
• Light Mode: See Setting the Light Mode on page 43.
• Reset Light Timer: See Resetting the Light timer on page 46.
• Light Usage Time: Displays the number of hours the lamp has been used.