BenQ MS560 - Indicators; Power events; Light events; Thermal events

47 Maintenance
Indicators
Light
Status & Description
Power events
Stand-by mode
Powering up
Normal operation
Normal power-down cooling
Download
CW start fail
Data abort, scaler shutdown abnormally
Scaler reset fail
Burn-in events
Burn-in on
Burn-in off
Light events
Light life exhausted
Light error in normal operation
Light is not lit up
Thermal events
Fan 1 error (the actual fan speed is outside the desired speed)
Fan 2 error (the actual fan speed is outside the desired speed)
Fan 3 error (the actual fan speed is outside the desired speed)
Temperature 1 error (over limited temperature)
: Off
: Orange On : Green On : Red On
: Orange Flashing : Green Flashing : Red Flashing