Operation 27
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various
adjustments and settings.
Below is the overview of the OSD menu.
The following example describes how to set the OSD language.
1. Press Menu/Exit on the projector or
remote control to turn the OSD menu on.
3. Press to highlight Language
and press / to select a
preferred language.
2. Use / to highlight the SYSTEM
SETUP: Basic menu.
4. Press Menu/Exit twice* on the
projector or remote control to
leave and save the settings.
*The first press leads you back to
the main menu and the second
press closes the OSD menu.
Current input signal
Main menu icon
Main menu
Sub-menu
Highlight
Press Menu/
Exit to the
previous
page or to
exit.
Status
To Next Page
Loading...
