Operation 51
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Operation
Settings
Direct Power On
Selecting On enables the function. See "Starting up the projector" on
page 24 for details.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off" on
page 56 for details.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image" on
page 39for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Remote
Receiver
Sets which IR remote sensor of the projector will receive the signal
from the remote control.
Background
Color
Allows you to select which background color will display when no
signal is input into the projector. Four options are available: BenQ
logo, Black, Blue, or Purple.
Splash
Screen
Allows you to select which logo screen will display during projector
start-up. Three options are available: BenQ logo, Black screen, or Blue
screen.
MyScreen
Allows you to capture the current projected picture to save as Splash
Screen.
4. SYSTEM SETUP:
Basic menu
To Next Page
Loading...
