Operation
48
Controlling the projector remotely through a web
browser
Once you have configured the LAN settings, you can find the IP address for the projector
in the bottom of the network screen. You can use any computer that is on the same local
area network to control the projector.
1. Enter the address of the projector in the address bar of your browser and press
Enter. For example: http://192.168.111.11
2. The BenQ remote network operation page opens.
• The web page control supports IE version 7.0 or higher.
• The illustrations in web page control, Q Presenter and USB Reader sections are for the
purpose of explanation and may differ from the actual design of your projector.
To Next Page
Loading...
