Operation36
2. The remote network operation page opens. This page allows you to operate the
projector as if you were using the remote control or control panel on the projector.
i. These buttons function the same as the ones on the OSD menus or remote
control. See "1. DISPLAY menu" on page 42 and "Remote control" on page 11 for
details.
ii. To switch input source, click on your desired signal.
• The Menu button can also be used to go back to previous OSD menu, exit and save menu
settings.
• The software is available in multiple languages: English, French, German, Italian, Spanish,
Traditional Chinese, Simplified Chinese, and Japanese. It will display the language of your
computer operating system (OS) when connected to the projector. If the language of your
OS is not available, it will display the English version.
The tools page allows you to manage the projector, configure the Network settings and
secure access of remote network operation on this projector.
i. You can name the projector, keep track of its location and the person in charge of
it.
ii. You can adjust the Network Settings.
iii. Once set, access to the remote network operation on this projector has been
password-protected.
To Next Page
Loading...
