BenQ MX716 - Remote Control Effective Range

Introduction 13
Remote control effective range
Infra-Red (IR) remote control sensors are located on the front and top of the projector.
The remote control must be held at an angle within 30 degrees perpendicular to the
projector's IR remote control sensors to function correctly. The distance between the
remote control and the sensors should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensors on
the projector that might obstruct the infra-red beam.
MX717
MX716
• Operating the projector from the front
A
p
p
r
o
x
.
+
1
5
º
MX717
MX716
• Operating the projector from the top
A
p
p
r
o
x
.
+
1
5
º
A
p
p
r
o
x
.
+
1
5
º
A
p
p
r
o
x
.
+
1
5
º