40 Maintenance
13. Tighten the screw that secures the lamp cover.
14. .Connect the power and restart the projector.
Resetting the lamp timer
15. After the startup logo, open the On-Screen Display
(OSD) menu. Go to Advanced Menu - Settings > Light Settings and press OK. The Light
Settings page appears. Highlight Reset Light Timer and press OK. A warning message is
displayed asking if you want to reset the light timer. Highlight Reset and press OK. The light time
will be reset to “0”.
• Loose screw may cause a bad connection, which could
result in malfunction.
• Do not over tighten the screw.
Do not reset if the lamp is not new or replaced as this could cause damage.
To Next Page
Loading...
