For setting the PointWrite kit on projector, please refer to the
PointWrite manual in the kit box you purchase.
12
(EN)
Specifications
Optical
Resolution
MX852UST+
1024 x 768 XGA
MW853UST+
1280 x 800 WXGA
Display system
Single-chip DLP
™
system
Lens F/Number
F = 2.5, f = 5.1 mm
Clear focus range
0.28m~0.45m (from IO to Screen)
Lamp
230W lamp
Electrical
Power supply
AC100-240V, 3.5A
50-60 Hz (Automatic)
Power consumption
320W (Max); < 0.5W (Standby)
Mechanical
Weight
11 lbs (5 Kg)
Output terminals
Speaker
10 watt x 2
Audio signal output
PC audio jack x 1
Monitor Out
D-Sub 15-pin (female) x 1
Control
USB
Type-B mini USB
(Optional PointWrite kit)
Type-A power supply 5V /1A
(Optional PointWrit Touch module)
RS-232 serial control
9 pin x 1
IR reciver x 1
LAN control
RJ45 x 1
Input terminals
Computer input
RGB input
D-Sub 15-pin (female) x 2
Video signal input
S-VIDEO
Mini DIN 4-pin port x 1
VIDEO
RCA jack x 1
SD/HDTV signal input
Analog-Component RCA jack x 3
(through RGB input)
Digital - HDMI x2
Audio signal input
Audio in
PC audio jack x 1
RCA audio jack (L/R) x 1
Environmental Requirements
Operating temperature
0°C–40°C at sea level
Operating relative humidity
10%–90% (without condensation)
Operating altitude
0–1499 m at 0°C–35°C
1500–3000 m at 0°C–30°C
(with High Altitude Mode on)
All specifications are subject to change without notice.
To Next Page
Loading...
