56 Navigating the main menu
Controller
Key 1
Sets the feature or setup menu to be accessed by
Controller Key 1.
• Brightness
• Contrast
• Adobe RGB
• sRGB
• B+W
• Rec. 709
• DCI-P3
• HDR
• DICOM (SW271
only)
• Darkroom
• Calibration 1
• Calibration 2
• Calibration 3
(SW271 only)
• Custom 1
• Custom 2
• CAD / CAM
(SW320 only)
• Animation
(SW320 only)
Controller
Key 2
Sets the feature or setup menu to be accessed by
Controller Key 2.
Controller
Key 3
Sets the feature or setup menu to be accessed by
Controller Key 3.
DDC/CI Allows the monitor settings to be set through the
software on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows monitor controls
to be sent via the software for remote diagnostics.
• ON
• OFF
Information Displays the current monitor property settings. • Input
• Current
Resolution
• Optimum
Resolution
(best with the
monitor)
• Model Name
• HDR (SW271
only)
Reset All Resets all mode, color and geometry settings to the
factory default values.
• YES
• NO
Item Function Range
To Next Page
Loading...