Operation54
The Crestron page is only available when you are on a Wired LAN network. It also allows
you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9.
i. These buttons function the same as the ones on the OSD menus or remote
control. See "2. Picture menu" on page 73 and "Remote Control" on page 14 for
details.
The Menu button can also be used to go back to previous OSD menu, exit and save menu settings.
ii. To switch input source, click on your desired signal.
iii. You can select a preferred OSD language.
The tools page allows you to manage the projector, configure the LAN control settings and
secure access of remote network operation on this projector.
To Next Page
