BenQ SX920+ - User Manual

Questions and Answers

C
Charlene ThomasAug 9, 2025
How to fix a BenQ SX920+ that does not turn on?
- D
  Debra BuckAug 9, 2025
  If your BenQ projector doesn't turn on, first, make sure the power cable is securely plugged into both the AC inlet on the projector's rear and a functioning power outlet (and that the outlet switch is on, if applicable). Also, if the projector is cooling down, wait until the process is complete before attempting to turn it on again. Lastly, ensure that the lamp cover is correctly and securely attached.
T
Travis AndradeAug 14, 2025
What to do if there is no picture on my BenQ SX920+?
- T
  Thomas ChenAug 14, 2025
  If your BenQ Projector is not displaying any picture, ensure that the video source is turned on and properly connected. Also, verify that the projector is correctly connected to the input source device. Finally, use the Source keys on the remote control or the SOURCE button on the projector to select the correct input source.
T
Trevor KnightAug 18, 2025
Why is my BenQ Projector remote control not working?
- M
  mcgrathanitaAug 18, 2025
  If the remote control for your BenQ Projector isn't working correctly, start by replacing the batteries with new ones. Then, make sure there are no obstacles blocking the path between the remote and the projector. Finally, ensure you are within 8 meters (26.2 feet) of the projector.
B
Brenda PayneAug 25, 2025
How to fix a blurred picture on a BenQ SX920+?
- T
  Tyler PruittAug 25, 2025
  If the picture from your BenQ Projector appears blurred, adjust the focus of the lens using the focus ring. Also, make sure that the projector and the screen are aligned properly by adjusting the projection angle, direction, and height if needed.
T
Timothy HurstAug 29, 2025
What to do if 3D content does not display correctly on BenQ SX920+ Projector?
- M
  matthew77Aug 29, 2025
  If the 3D content on your BenQ Projector is not displaying correctly, begin by recharging the 3D glasses. Next, verify that the settings in the 3D menu are correctly configured. Also, confirm that you are using a 3D Blu-ray Disc. Finally, select the correct source using the SOURCE key on the projector or remote control.
P
Patricia CalhounSep 3, 2025
Why is the image unstable on my BenQ Projector?
- T
  Taylor FryeSep 3, 2025
  If the image on your BenQ Projector is unstable, ensure that the connection cables are securely connected to both the projector and the signal source. Correctly connect the cables to the appropriate terminals.

BenQ SX920+ Specifications

General

Brightness	5000 ANSI Lumens
Display Type	DLP
Throw Ratio	1.39-2.09:1
Zoom Ratio	1.5x
Projection Technology	DLP
Light Source	Lamp
Keystone Correction	Vertical: ±30 degrees
Connectivity	HDMI, VGA, USB, RS232
Projection Size	30-300 inches
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing