How to fix BenQ Projector that does not turn on?
If your BenQ Projector doesn't turn on, first ensure the power cord is securely plugged into both the projector's AC power jack and a working power outlet, checking that the outlet switch is on. Also, if the projector is cooling down, wait for the process to complete before attempting to power it on again.
Why does not BenQ TH682ST Projector remote control work?
If the remote control for your BenQ Projector isn't working, try the following: * Replace the battery with new ones. * Remove any obstacles between the remote control and the projector. * Ensure you are within 8 meters (26 feet) of the projector.
What to do if my BenQ TH682ST has no picture?
If you have no picture on your BenQ Projector, make sure the video source is turned on and correctly connected. Check the connection between the projector and the input signal device. Select the correct input signal using the SOURCE key on the projector or remote control. Finally, ensure the lens cover is open.
How to fix blurred image on BenQ TH682ST?
If you're experiencing a blurred image with your BenQ Projector, try these steps: 1. Adjust the focus of the lens using the focus ring. 2. Adjust the projection angle, direction, and height of the projector to properly align it with the screen. 3. Ensure the lens cover is open.
General| Display Technology | DLP |
|---|---|
| Native Resolution | 1920 x 1080 (Full HD) |
| Brightness | 3000 ANSI Lumens |
| Contrast Ratio | 10, 000:1 |
| Throw Ratio | 0.69 - 0.83 |
| Projection Size | 60" - 100" |
| Lamp Life (Normal) | 4000 hours |
| Input Lag | 16 ms |
| Speakers | 10 W |
| Lamp Life (Eco) | 10000 hours |
| Connectivity | HDMI, USB, VGA |
| Input Ports | 2 x HDMI, 1 x VGA, 1 x USB, 1 x Composite Video |
| Output Ports | Audio Out |
| Keystone Correction | Vertical: ±40 degrees |
General safety guidelines for projector operation and handling.
Safety precautions and recommendations for ceiling mounting the projector.
Describes the four possible installation locations for the projector.
Illustrates how to connect various video and audio sources to the projector.
Details different connection methods and their video quality.
Step-by-step guide on how to power on and begin using the projector.
Instructions for adjusting image height, angle, and auto-correction.
Guidance on using the zoom and focus rings for optimal image quality.
Instructions on using a security cable lock and setting up a password.
Guide to selecting and switching between different input sources.
Features for enhancing image quality, like Wall Color and Picture Modes.
Adjustments for brightness, contrast, color, tint, sharpness, and brilliant color.
Steps for properly shutting down the projector and direct power off.
Explains advanced system setup options and configurations.
Detailed functions for High Altitude, Lamp, Security, and Test Pattern.
Settings and modes to maximize the projector lamp's lifespan.
Indicators and messages signaling the need to replace the lamp.
Detailed, step-by-step instructions for safely replacing the projector lamp.
Common causes and remedies for the projector failing to power on.
Troubleshooting steps for display issues like no picture or blurriness.
Reasons why the remote control may not function or password issues.
Technical specifications including optical, electrical, and mechanical details.
To Next Page
