BenQ WM04G4 - Adjusting Projector Mount Angles and Slides

To Install The Projector On The Projector Wall Mount
To Adjust The Vertical Tilt
A
B
A
B
Adjustment buttons
Adjustment
direction
A
B
A
B
Adjustment buttons
Adjustment direction
To Adjust The Horizontal Roll
● Locking the screw e.
● Please put the power cable and other cables
through the setting plate at the top of the hole.
e
Connect the
power cable
and other cables
to the projector.
The power cable and
other cables through
the Setting plate.
Ｅ Ｎ Ｇ Ｌ Ｉ Ｓ Ｈ