Bently Nevada Velomitor Sensor - Mounting Adapters - Option AA

330500 Velomitor Sensor, 330525 Velomitor XA Sensor, 330530 Radiation Resistant Velomitor Sensor Operation Manual
4
Part Number Options
330525 AA
Description
00 No Approvals
01 CSA Approvals
02 ATEX Approvals
Part Number Options
330530 AA
Description
01 1/2 - 20 UNF P/N: 89409-01
02 M8 X 1
P/N: 89410-01
03 1/4 - 28 UNF
P/N: 89411-01
04 1/4 - 20 UNC P/N: 89412-01
05 1/4 - 18 NPT P/N: 89413-01
06 5/8-18 UNF P/N: 04300015
07
3/8-16 UNC P/N: 165025-01
08 1/2-13 UNC P/N: 161191
1.3.2 Mounting Adapters — Option AA
The base of the 330500 and 330530 Velomitor® Sensor are machined with a 3/8-
24 internal thread that will accommodate a variety of purchased or customer-
manufactured mounting studs. Bently Nevada offers the 7 adapter studs listed in
Table 1-1. You can order one stud with each transducer or purchase the studs
separately. Table 1-1 also lists Bently Nevada part numbers used for ordering
separate adapter studs.
The base of the 330525 Velomitor® Sensor is machined with a 1/4-18 NPT
external thread.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com