Bently Nevada Velomitor Sensor - Cable Options

Section 1 - Operating Information
9
1.5 Cable Options
The Velomitor® Sensor requires a two-conductor cable. We recommend using
shielded cable to minimize noise interference. Table 1-2 describes the Bently
Nevada cables used with the 330500 Velomitor® Sensor, Table 1-3 describes the
cables used with the 330525 Velomitor® Sensor, and Table 1-4 describes the
cables used with the 330530 Radiation Resistant Velomitor® Sensor. Figures 1-5
through 1-9 show the configuration of the cable and connector for each of the
sensors.
Table 1-2. 330500 Velomitor® Sensor Interconnect Cable and
Accessories
APPLICATION P/N CABLE DESCRIPTION
Standard Temperature
Unarmored Cable
9571-AA Shielded 22 AWG cable with moisture-
resistant female socket connector at
transducer end, ring lugs at monitor end.
Standard Temperature
Armored Cable
84661-AA Same as 9571-AA but with flexible
stainless steel armored cable.
Cable for use with weather-
proof housing
89477-AA Two-conductor shielded cable with a
connector adapted for use with the 21128
Velocity Transducer Housing Assembly.
Bulk Cable 02173006 Two-conductor shielded 18 AWG bulk
cable. Specify number of feet.
Spare Connector 00531061 Velomitor® Sensor Cable Connector
Spare Connector Clamp 00530574 Connector Clamp
Table 1-3. 330525 Velomitor® Sensor Interconnect Cable and
Accessories
APPLICATION P/N CABLE DESCRIPTION
Standard Temperature
Armored Cable
106765-AA Flexible Stainless Steel Armored Cable
Bulk Cable 02173007 Two-conductor shielded 22 AWG bulk
cable. Specify number of feet.
Spare Boot 03839144 Fluorosilicone Elastomer Boot
Spare Boot Clamps 03839142
03839143
Bottom Clamp
Top Clamp
Table 1-4. 330530 Velomitor® Sensor Interconnect Cable and Accessories
APPLICATION P/N CABLE DESCRIPTION
Standard Temperature Unarmored
Cable
330533-AA Shielded 18 AWG cable with moisture-
resistant female socket connector at
transducer end, ring lugs at monitor end.
Bulk Cable 175873 Two-conductor shielded 18 AWG bulk
cable. Specify number of feet.
Spare Connector 00531061 Velomitor® Sensor Cable Connector
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com