Need help?Do you have a question about the Bentone B 1 FUV 63-16 and is the answer not in the manual?
General| Fuel | Oil |
|---|---|
| Protection Class | IP 40 |
| Fuel Type | Light oil |
| Nozzle | Danfoss |
| Control | Electronic |
| Voltage | 230 V |
Detailed measurements and diagrams for the B 1 FUV model.
Specifications for flange dimensions and blast tube length.
Provides electrical specifications for the B 1 FUV burner.
Details the hole pattern required on the boiler for burner flange.
Table detailing nozzle sizes, flow rates, and power output at various pressures.
Considerations for oil quantity reduction due to preheating.
General guidelines for installing and operating oil burners according to local regulations.
Procedure for correct setting via flue gas analysis and temperature measurement.
Ensuring the burner flange hole pattern matches the boiler and mounting.
Instructions for connecting oil lines and electrical systems.
Procedure to check for and tighten leaking oil line couplings.
Example settings for a 30 kW output, including nozzle and pump pressure.
Guidance on selecting the correct nozzle based on burner output.
Provides setting values for air, insert, and suction plate.
Using the lever to set the correct pressure drop via the brake plate.
Importance of adjusting air intake for good combustion.
How to increase or decrease airflow using the air intake control.
Schedule and safety precautions for burner servicing.
Method to hang the burner for easier access during servicing.
Step-by-step guide for servicing the combustion assembly.
Technical data and component list for the DANFOSS BFP41 oil pump.
Suction line tables for 1-pipe systems with overlying and underlying tanks.
Suction line tables for two-pipe systems.
Considerations for oil quantity reduction when using a preheater.
Explanation of the FPHB 5 preheater's function and operation.
Diagram illustrating the electrical wiring connections for the oil burner control.
Details the operating sequence and functions of the LMO14/24 oil burner control.
Troubleshooting guide for symptoms when the burner fails to start.
Troubleshooting guide for when the burner fails to start after previous operation.
General guidelines for keeping the boiler room clean and safe, plus starting precautions.
Troubleshooting steps for when the burner fails to start or ignite.
Instructions for summer shutdown and important safety warnings.
To Next Page
