Need help?Do you have a question about the Bentone B 30A and is the answer not in the manual?
Details component lifespan and recommended replacement cycles.
Instructions for verifying received goods and reporting transit damage.
Provides detailed physical dimensions and measurements for the B 30 burner.
Specifies the dimensional details of the burner's mounting flange.
Illustrates the operational performance range of the B 30 burner.
Outlines the electrical characteristics and IP rating of the burner.
Guides on adjusting the brake plate and controlling air flow for optimal combustion.
Lists recommended nozzle types and corresponding pump pressures for operation.
Provides guidance on the mechanical aspects of burner installation.
Comprehensive table detailing nozzle performance based on pump pressure and flow rate.
Identifies and illustrates the various components of the B 30 burner.
Outlines fundamental safety and operational rules for burner installation and use.
Specifies the requirement to keep installation and maintenance documents accessible.
Highlights the supplier's responsibility to provide user instructions.
Advises on regular examination of the burner for malfunctions or leaks.
Details procedures for correct setting and initial operation to ensure efficiency.
Provides guidance on safe handling and lifting procedures for the burner.
Procedures for checking delivered goods for damage and reporting issues.
Steps to ensure the burner is compatible and ready for installation.
Guidelines for designing and setting up the oil distribution system correctly.
Instructions and precautions for making the electrical connections to the burner.
Step-by-step guide on physically attaching the burner to the boiler.
Method for verifying the integrity of oil line connections after installation.
Instructions for adjusting the air damper for optimal air flow.
Guidance on adjusting the nozzle assembly and brake plate for combustion performance.
Provides example settings for the B 30 burner to facilitate initial startup.
Graphical representation of setting values for the nozzle assembly.
Graphical representation of setting values for the air damper.
Table showing recommended excess air levels for different flue gas parameters.
Detailed steps for removing, cleaning, and reinstalling the combustion assembly.
Procedures for inspecting, cleaning, and maintaining the air damper system.
Instructions for inspecting and servicing the burner's fan components.
Steps for replacing the drive shaft connecting the motor and pump.
Guide on how to replace the oil pump unit on the burner.
Information on checking for and mitigating vibration issues.
Overview of the SUNTEC AS pump, including technical data and components.
Describes the specific applications and fuel types for the AS47C pump.
Explains the internal workings and oil flow of the SUNTEC AS pump.
Details the rapid cut-on and cut-off mechanism of the pump's solenoid valve.
Provides tables for calculating suction line lengths based on pump capacity and head.
Step-by-step guide for replacing the filter element within the pump.
Instructions for checking and ensuring the integrity of oil line seals.
Procedures for removing and installing the solenoid valve on the pump.
Steps for replacing the gasket seal on the pump cover.
Presents the electrical wiring diagram for LOA 21 and LOA24 burner controls.
Enumerates and identifies the various components of the oil burner control system.
Explains the operational sequence and functions of the LOA control system.
Guides on diagnosing and resolving issues when the burner fails to initiate operation.
Troubleshooting steps for failures occurring after the burner has been running.
Identifies causes and remedies for delayed burner ignition or pulsating flames.
Information on diagnosing and addressing unusual noise originating from the pump.
Troubleshooting tips for when the burner pump fails to build sufficient pressure.
Basic guidelines for maintaining a clean and safe boiler room environment.
Essential checks and procedures before starting the burner.
Advice on what to do if the burner starts but fails to ignite or runs erratically.
Instructions for safely switching off and storing the burner during summer.
Critical safety precautions and warnings for burner operation and maintenance.
To Next Page
General