Bentone B 30A - Default Chapter; Table of Contents

3 Bentone
General
Table of contents
1. General Information ___________________________________ 4
2. Technical data ________________________________________ 7
2.1 Dimensions B 30 ___________________________________ 7
2.2 Dimensions flange __________________________________ 7
2.3 Working field B 30 _________________________________ 8
2.4 Setting of brake plate and air flow ____________________ 9
2.5 Recommended nozzle and pressure __________________ 9
2.6 Burner installation __________________________________ 9
2.7 Nozzle table ______________________________________ 10
2.8 Description B 30 __________________________________12
3. General instructions _________________________________13
3.1 General rules _____________________________________13
4. Installation _________________________________________14
4.1 Handling and lifting instruktion ______________________14
4.2 Acceptance inspection _____________________________15
4.3 Preparations for installation _________________________15
4.4 Distribution of oil __________________________________15
4.5 Electrical connection _______________________________15
4.6 Mount the burner on the boiler ______________________16
4.7 Check oil line seals ________________________________16
4.8 Air setting ________________________________________ 17
4.9 Nozzle assembly adjustment, brake plate _____________17
5. Burner installation ___________________________________18
5.1 Examples of basic setting B 30 ______________________ 18
5.2 Setting values for nozzle assembly B 30 ______________19
5.3 Setting values for air damper B 30 ___________________19
6. Burner servicing _____________________________________20
6.1 Servicing the combustion assembly _________________20
6.2 Servicing air dampers _____________________________21
6.3 Servicing the fan __________________________________22
6.4 Replacement of oil pump ___________________________ 23
6.5 Vibration _________________________________________ 24
7. Instructions Pump ___________________________________25
7.1 SUNTEC AS _____________________________________25
8. Replacement of electrical components ________________31
9. Oil burner control ____________________________________32
9.1 Wiring diagram LOA 21... / LOA24... _______________32
9.2 List of components ________________________________ 33
10. Fault Location _____________________________________34
10.1 Burner will not start ________________________________34
10.2 Burner will not start after normal use _________________34
10.3 Delayed ignition ___________________________________ 35
10.4 Noise in pump ____________________________________ 35
10.5 Pump pressure ___________________________________35
11. Log of flue gas analysis _____________________________36
12. Oil burners maintenance instructions ________________ 37