Need help?Do you have a question about the BePro LX-480 and is the answer not in the manual?
Audio Specifications| audio output power | 10W+110W(8Ω) |
|---|---|
| audio output power (1KHz,8Ω) | 0.05% |
| audio input sensitivity MIC | 3.5mV/3.3KΩ |
| audio input sensitivity MUSIC | 350mV/33KΩ |
| audio output level PRE-OUT | 2.8V/1KΩ |
| audio output level SUB OUT | 5.2V/1KΩ |
| recording output | 340mV/1KΩ |
| frequency response MIC | 20Hz ~ 15KHz, -0.2 ~ -1dB |
| frequency response MUSIC | 20Hz ~ 20KHz, -1 ~ -0.5dB |
| tone control response MIC BASS | +9 ~ -11dB(100Hz) |
| tone control response GAIN | +11.5 ~ -13.5dB(1KHz) |
| tone control response FREQ | 95 ~ 4KHz |
| tone control response TREBLE | +6.5 ~ -8.5dB(10KHz) |
| speaker impedance | 8Ω ~ 16Ω |
Video Specifications| video input sensitivity | 1Vp-p/75Ω |
|---|---|
| video output level | 1Vp-p/75Ω |
Echo and Reverb| echo delay time (MAX) | 300ms |
|---|---|
| echo repeat time (MAX) | 5 Sec |
| reverb delay time (MAX) | 10 Sec |
Power Supply| power supply voltage | 110/120 VAC 50~60Hz |
|---|---|
| power supply voltage alternate | 220/240 VAC 50~60Hz |
| power consumption | 500W |
Weight and Dimensions| dimensions (W x H x D) | 430x136x415mm |
|---|---|
| weight | 13kg |
To Next Page