EasyManua.ls Logo

Bercomac 700713 - OPERATION AND ADJUSTMENTS; Operating the Cutter Safely

Bercomac 700713
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
OPERATION
OPERATING THE TRAIL CUTTER
The operation of any mower can produce foreign
objects to be thrown into the eyes, resulting in severe
eye damage.
Always wear certified safety glasses or wide-vision
safety goggles over spectacles before starting any
cutting machine and while operating such a machine.
The operation of any mower produces sound waves
that are damaging to the human ear. Ear protection is
recommended.
Do not operate on slopes of more than 15 degrees.
Do not use equipment driving backwards. Always look
down and behind, before and while driving
backwards.
CAUTION
Tragic accidents can occur if the operator is not alert
to the presence of children.
Children are often attracted to the equipment and the
mowing activity. Never assume that children will
remain where you last saw them.
ATTACHING TRAIL CUTTER TO TOW VEHICLE
A 2’’ BALL HITCH IS REQUIRED ON THE TOWING
VEHICLE.
Back the vehicle up to desired towing position.
Offset the Trail Cutter to the side opposite the tow
vehicle discharge (if any). This prevents the tow
vehicle from throwing grass into Rough Cutter‘s
engine.
Adjust the height of the rough cutter using the
adjustment screw (item 1).
DANGER
ALWAYS OPERATE FROM THE DRIVER’S SEAT
AND ALWAYS INSTALL ON YOURSELF THE
EMERGENCY SWITCH LANYARD THAT IS LINKED
TO THE CONTROL BOX.
NEVER OPERATE WITHOUT THIS LANYARD .
1

Related product manuals