5
ASSEMBLY
ASSEMBLY INSTRUCTIONS
IMPORTANT: UNLESS OTHERWISE SPECIFIED TORQUE ALL BOLTS ACCORDING TO TORQUE SPECI-
FICATION TABLE (SEE TABLE OF CONTENTS) WHEN STATED: TIGHTEN FIRMLY. REFER TO PARTS
BREAKDOWN SECTION FOR PART IDENTIFICATION.
Overall view once assembled
NOTE: In this manual, the right and left side is determined being seated on the driver’s seat facing forward.
Remove the mower and all the other components
from the crate.
INTENDED USE
This Finishing mower is designed to produce a quality finish cut on lawns, golf courses, etc. It is not designed to
clear brush or cut saplings. Your Finishing mower should be towed behind an ATV, a golf cart, tractor, or similar
approved vehicle. It is not meant for speeds exceeding 5 mph. Please refer to the towing vehicle’s manual fand
respect the towing capacities specified.
To Next Page
Loading...