BERG KOMPBERG BSDF 30 - Qualification Requirements for Operation of the Compressor; Operation

Operating and Maintenance Manual 09/2019 – part I
Screw compressors
6
Warning bout forbidden use
 The compressor must not be used for any other purposes that are non-compliant with its
intended use.
 Under no circumstances must the limit operating parameters of the compressor be
exceeded and changed - refer to section 10 "Technical data".
 To use it for compression of other gases than air, it is required to obtain the manufacturer’s
consent. The above consent must be in written form.
 The compressor must not be used in potentially explosive atmospheres within the meaning
of Directive 2014/34/EU.
 The compressor must not suck any toxic, acid-containing, flammable or explosive gases
and vapours.
 Never direct a jet of compressed air at people or animals.
Safe use of the compressor
 The compressor must be operated in accordance with all guidelines included in this
operating and maintenance manual.
 The sucked air must be clean and must not contain any harmful substances.
 The heated cooling air may be used for heating purposes if only its harmfulness to people
and animals is excluded. Otherwise, it is necessary to provide the appropriate treatment of
cooling air.
 Compressed air may only be used for breathing after its appropriate treatment.
 Compressed air not subjected to the appropriate treatment must not be used in production
processes in which there is contact of air with food.
The compressor delivered is designed to compress only air. To use it for
compression of other gases, it is required to obtain the manufacturer’s consent. The
above consent must be in written form. The compressor must not be used for any
other purposes that are non-compliant with its intended use.
Fulfil the obligation to register the compressor air receiver in the Office of Technical
Inspection (UDT).The compressor documentation is accompanied by the set of the
required documentation of the air receiver (if applicable) and safety valve.
1.3. Qualification requirements for operation of the compressor.
The personnel who installs, operates and maintains the compressor should have the
appropriate education and qualifications enabling safe operation of electro technical and
electrical equipment.
Installation, operation and maintenance of the compressor may only be carried out by the
persons who are familiar with this operating and maintenance manual, follow instructions
included in it, know safety regulations and recognised technical rules.
1.4. Operation
While operating the compressor:
- Observe the instructions provided in the Operating and Maintenance Manual and Warranty
Book.
- Follow the periodic inspection schedule during both warranty period and after its completion.
Regular performance of periodic inspections is necessary to ensure the required reliability
and life of the BERG equipment. The inspections performed according the schedule reduce
the number of repairs and their cost.
- The technical and operating inspections should be carried out in accordance with the
schedule and conditions by the factory service or authorised service, using the
manufacturer’s consumables and spare parts.
- During the warranty period, use only the manufacturer’s consumables and spare parts.