Editon October 2011 (Rev. 05. January 2018) 2
PROJECT GUIDE
BERGEN ENGINE TYPE B
FUEL GAS OPERATION
The information in this manual is PRELIMINARY as this is a new engine type under
development. The data and information given, related to the engines, are subject to
change without notice.
This project guide is intended as a tool to assist in project work for installations that include
Bergen engines.
Binding drawings and technical data will be submitted after receipt of orders.
Components and systems shown in this guide are not necessarily included in the Rolls-Royce
scope of supply. All copies of this document in hard and soft format are uncontrolled. To verify
latest revision status contact salessupport.bergen@rolls-royce.com.
NOTE
The data and information, related to the engines given in this guide, are subject to change
without notice.
NOTE
The information in this guide is applicable for marine applications only.
© Bergen Engines AS 2018
A Rolls-Royce Power Systems Company
The information in this document is the property of Bergen Engines AS, a Rolls-Royce Power Systems Company, and may not be
copied, or communicated to a third party, or used, for any purpose other than that for which it is supplied without the express written
consent of Bergen Engines AS.
Whilst the information is given in good faith based upon the latest information available to Bergen Engines AS, no warranty or
representation is given concerning such information, which must be taken as establishing any contractual or other commitment binding
upon Bergen Engines AS, its parent company or any of its subsidiaries or associated companies.
Bergen Engines AS
P.O.Box 329 Sentrum
N-5804 BERGEN
NORWAY
Tel. +47 55 53 60 00
Homepage: www.rolls-royce.com
E-mail: salessupport.bergen@rolls-royce.com
Enterprise no. NO 997 016 238
A Rolls-Royce Power Systems Company
To Next Page
Loading...