USER MANUAL 1.7 | EC1000
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
EC1000_HB_en_2D1652008ZD00.docx | 2VF100179FE06.docx
Performance features – an overview
400 MHz CPU
User program and data memory (RAM): 128 MB on board, max. 96 MB for application
User program memory (Flash): 64 MB on board / 56 MB for CODESYS V2.3 resp. 40 MB for
CODESYS V3 application
Retain memory, 24 kB
1 Ethernet 10/100 base T interface
1 USB Host interface V1.1
1 CAN interface at the front
1 RS232 serial interface for programming tools and application
1 EtherCAT interface with up to 10 users (or max. 2 A)
Realtime clock
1 SD card slot
Slot for left-hand extension module for communication (optional)
Scope of Supply
The scope of supply of the controller module consists of:
Ethernet Controller EC1000
Accessories
PLUG-IN CONNECTOR SET for EC1000; order no.: 201605600 (only 204900001 and 204900101)
PLUG-IN CONNECTOR SET for EC1000; order no.: 201608400 (all)
Shield connection terminals:
2 x 8 mm; order no.: 204802400
1 x 14 mm; order no.: 204802500
To Next Page
Loading...
