BERGHOF EC1000 - Hazard Categories and Terminology; Conformity Declaration

USER MANUAL 1.7 | EC1000
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
EC1000_HB_en_2D1652008ZD00.docx | 2VF100185FE05.docx
8
1.2. Hazard Categories and Terminology
The indications described below are used in connection with safety instructions you will need to observe for
your own personal safety and the avoidance of damage to property.
The indications have the following meaning:
DANGER
Immediate danger
Failure to observe the information indicated by this warning will result in death,
serious injury or extensive property damage.
WARNING
Potential danger
Failure to observe the information indicated by this warning may result in
death, serious injury or extensive property damage.
CAUTION
Danger
Failure to observe the information indicated by this warning may result in injury
or property damage.
NOTICE
No hazard
Information indicated in this manner provides additional notes concerning the
product.
1.3. Conformity Declaration
Both the standard version of the controller module and the extension modules mentioned below comply with
and make allowance for the following directives and standards:
 EMC Directive 2014/30/EU
 RoHS Directive 2011/65/EU
 DIN EN 61131-2: Programmable controllers
Part 2: Equipment requirements and tests
 EN 50581: Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
 UL 508: Industrial Control Equipment
17 th edition / 1999-01-28