Meat Grinder Attachment
IMPORTANT SAFEGUARDS OF MEAT
GRINDER ATTACHMENT
To
ensure
you
and
others
safety,
avoid
injury
or
and
property
loss,
please be sure to follow the safety precautions
WARNING
1.
DO
NOT
put
your
hands
into
any
attachments
when
it
is
running;
2.
DO NOT PUT utensils or other objects into any attachments when
it is running.
3.
DO NOT feed items into the feed tube by hand; always use the food
pushers:
4.
DO NOT install and disasemble any parts before the motor stops
completely;
5.
Please stop using the meat grinder attachment if there is any
broken parts before the motor stops completely;
6.
Please stop using the meat grinder attachment if there is any
broken parts;
7.
Keep safe distance if you are wearine a tie, scarf, long necklace or
loose closhes.
Your
long
hair
also
needs
to
be
fixed
with
a
hairpin
to
avoid
getting
involved in the product;
8.
DO
NOT
put
nuts
or
other
tough
food
into
the
feed
tube
when
the
machine
is
running.
Otherwise,
it
will
cause
serious
damage
to
this
grinder attachment;
9.
DO NOT let the attachmentidling on the Stand Mixer for more than
30 secands:
10.
DO NOT put any attachments into the disinfection cabinet for
sanitization.
PARTS INTRODUCTION OF
MEAT
GRINDER
ATTACHMENT
1.
Please be careful when taking out and cleaning the accessories
because the blades are very sharp.
2.
Please ensure that the kitchen table is clean before using the
product.
3.
If the attachment get stuck or any emergency situation, please
unplug the stand mixer immediately and disassemble the
attachment to remove the remaining food.
4.
For best cleaning, rinse blades immediately after use. If
necessary, use a dish washing brush
5.
Natural cooling the meat grinder attachment for 15 minutes after
10
minutes
continuously
running
is
highly
recommended
as
a
good
PRODUCT INTRODUCTION OFMEAT
GRINDER ATTACHMENT
PRODUCT
INTRODUCTION
USING
DESCRIPTION
1.
SPEED
SETTING
Installation
and
removal
instructions
Lock
the
collar
in
the
direction
shown.
Note:
When
removing
attachment,
you
need
to
press
the
eject
button
of
the
machine
by
hand
first,
and
then
turn
the
attachment clockwise.
PRECAUTIONS OF MEAT GRINDER
ATTACHMENT
CARE AND
CLEANING
1-)Do not use metal objects (a knife or any other sharp objects) to
clean the parts in the meat grinder attachment.
2-)Do
notclean
the
blades
with
dish
towels
or
any
other
cloth.
3-)Do
not
place
the
meat
grinder
attachment
under
high
temperature for a longtime.
After
using
this
product,
take
out
the
product
accesso mes,
and
the n
use
the
cleaning
brush
to
clean
the
residual
food
on
each
accessory.
You
can
use
soapy
water
to
clean
the
hard-to-remove
stains
1
on
the
surface,
and then rinse them with clean water
After
cleaning
the
stinding
plate
andthe
blade, it is recommended to use
cooking oil to prevent discolor
ation
and
rust.
Clean
the
housing
of
the
meat
grinder
attachment
by
hand
only.
Dry
thoroughly
with
maintenance
way
6.
Close
supervision
is
necessary
when
any
appliance
is
used
by
ornear children.
3)
The
convex
angles
of
the
grinding
plate
and
sausage
stuffer
attachment
are
aligned
with
concave
angles
of
the
main
housing.
a soft dry cloth. Do not w ash in the
dishwasher.
(Note:
The
blade
is
extremely
sharp,
please
take
protective
measures
when
cleaning for example wear
Store
all
accessories
in
the
pusher
to
avoid the loss
!
Take out the front cover of the machine, Align the lock with a 45 degree Angle and insert the
attachment into the machine linterface, and turn the attachment anticlockwise into place.
EJECT
BUTTON
To Next Page
Loading...
