Configuring Controllers | Managing Programs |
56
Omega | Installation and Operation Guide | Rev A | Doc P/N: PIEAE21-OMEGA
Defining Measuring Type
Define the method used to control the amount of water used during an irrigation session using one of the following two options:
Quantity Measuring Type Duration Measuring Type
1.
Select the Quantity option to have
a water meter control the volume of
water used per irrigation session
3.
Select the valve and set the
volume of water
2.
Click to add a new valve to the
program
1.
Select the Duration option to
have a timer control the amount of
water used per irrigation session
2.
Click to add a new valve to the
program
3.
Select the valve and set the
irrigation duration
4.
Click Save
4.
Click Save
NOTE: The top valve
in the list will start
irrigating, followed by
the other valves in
sequence according to
their order in the list
To Next Page
