Introduction | Overview |
9
Omega | Installation and Operation Guide | Rev A | Doc P/N: PIEAE21-OMEGA
Overview
Omega is an advanced cloud-based irrigation controller. It provides a user-friendly and cost-effective solution for irrigation heads as well as water distribution, data
acquisition, and pre-paid systems.
Controller Features
Offline and online control.
Volumetric and time-based irrigation.
High/low flow monitoring (when used with a water meter pulse sensor).
Leak detection.
Up to five latch outputs, four digital inputs, and two analog inputs.
Option to connect up to ten extension controllers in parallel via RS-485,
allowing for a total of 44 latch outputs, 44 digital inputs, and 22 analog
inputs. (RS models only)
Option to connect up to forty RF remote units via an RF gateway, each
with a single latch output. (RS models only)
Comprehensive log registry allows for long periods of offline operation.
Up to 5 years battery-powered operation in low-energy mode, with option
to connect to external power source.
Industrial grade electronic components (-35 °C to 75 °C).
IP65 rated with UV protection for outdoor installation.
CE and FCC standard compliant.
Communication Features
Built-in GSM modem with global data SIM card for worldwide Internet
connectivity.
Secured end-to-end communication using 4G modem with 2G fallback.
Supports NB-IoT, CAT-M, and GPRS protocols.
Real-time alert notifications to a PC, tablet, and smartphone.
BLE communication, enabling local smartphone connection to the Omega
controller.
To Next Page
Loading...
Need help?
General
